Accessories for BL 5/16" shaft
Spindles, Arbor, Collet Holders and Mandrels have 5/16" diameter holes with two set screws for ues in 5/16" motor shafts.
|
Tapered Spindle
TM-5 (Left hand)
$8.50
TM-6 (Right hand)
$8.50
|
Wheel Mandrel
WM-5 (Left hand)
$12.75
WM-6 (Right hand)
$12.75
|
CHA-5 With 3/32" 1/8" and 1/4" Collet
$24.75
|
JCA Right hand side
$38.00
|
Order Toll Free 888-593-9462
|
PowerGraver ® Kit 2293 and Components
|
The 2293 PowerGraver Kit provides a power assist to stone setting and engraving operations. It's PG motor is designed for high torque/low speed applications, and features a totally enclosed housing with permanently lubricated ball bearings for quiet, trouble-free performance.
The 9D handpiece works and feels like a hand engraving tool with the added advantages of greater control and the ability to adjust the impact force.
The unit comes equipped with a special, extra flexible neoprene sheath and a 6' long power cord.
The PowerGraver is ideal for bead, prong, channel, hammer and bezel setting, as well as decorative and engraving work.
A 32-minute instructional video is included, along with a set of accessories and maintenance items described below.
|
| INCLUDES:
- Series PG Premanent Magnet Motor
- No. 9D Handpiece
- EMG Dial Control
- FCG on/off Foot Switch
- 1/16" 3/32" 1/8" and 3mm Collets
- Set of 4 Gravers
- Anvil Point
- Carbide Stylus
- Grease & Handpiece Oil
2 YEAR MOTOR WARRANTY
Kit No. 2293-2 220/240 V
CALL
|
Order Toll Free 888-593-9462
|
PowerGraver ® Accessories |
Collet 1/32" (.8mm)
602
$6.00
|
Collet 1/16" (1.6mm)
602
$6.00
|
Collet 3/32" (2.35mm)
603
$6.00
|
Collet 1/8" (3.18mm)
604
$6.00
|
Collet 3mm
605
$6.00
|
Set of 4 Collets 605 Not in set
600
$21.00
|
Anvil 3/32" shank
10177P
$3.50
|
Pave Diamond Point
3/32" shank
R15G
$17.00
|
Carbide Point
3/32" shank
A-EP165P
$25.00
|
Order Toll Free 888-593-9462
|
No. 9D Handpiece
This chuck type handpiece has a special quick disconnect that fits only the PG motor sheath. It has an adjusting ring that changes the impact force and a palm rest that provides the comfort and "feel" of a hand engraving tool.Comes with 3 interchangeable collets (1/16", 3/32", 1/8").
$149.00
|
Order Toll Free 888-593-9462
|
|
PowerGraver Motor
INCLUDES:
- 36" Neoprene Flexible Sheath
- Full Two Year Warranty
$183.00
|
Order Toll Free 888-593-9462
|
FCG on/off Foot Switch
$21.50
For use on 110V or 220V
| 
EMGX Dial Control
64.00
|
Order Toll Free 888-593-9462
|
1050 Micro Motor KitBrushless, High Torque, High Speed Micromotor Kit Variable Speed 1,000 To 50,000 RPM
|
| The 1050 Kit Includes:
- HP4-717 Control
- MH-150 Handpiece With 3/32" Collet
- HP7-7060 Variable Speed Foot Control
- Handpiece Cradle
- Spare Fuse
- Total Value
$1095.00
$931.00
|
The 1050 Micromotor features high torque throughout the speed range of 1,000 to 50,000 RPM. High speed provides smooth, clean, and sharp detailing in metal and wood. lt's also great for bright-cutting, grinding, finishing, texturing, and polishing. Medium speed is for effortless and fast stock removal in wood, diestone, or acrylic. low speed offers extra control and power for stone setting and milling.
FRONT PANEL FEATURES:
- Dial speed control sets precise speed
and torque
- Auto cruise
- Forward or Reverse rotation
- Dial or Foot speed control
- Digital display for precise speed and torque settings
- Built in overload protection
|
Order Toll Free 888-593-9462
|
1050 Micro Motor Components
|
MH-150 Micro Motor Handpiece
6.3" overall length, 1/2" grip diameter. 1.06" motor diameter. 8.4 oz 288 gram. DC32V/1.2A. Continuous Torque/Watts 0utput-5oZ.in(mNm35)/110.
Handpiece has a slender,contoured grip for precise and very high speed work and quick release rotary type chuck. Use with accessories rated for at least 50,000 RPM.
Features a brushless motor design with a high torque motor that is powerful even at minimum speeds. The sealed housing eliminates dust, noise, and vibration. and there's never a need to replace carbon brushes. Comes with 2.35mm (3/32") collet.
$510.00
|
Order Toll Free 888-593-9462
|
HP4-717 Micro Motor Control Box
|
|
50/60 Hz, 4.0 Amps, 5.4" wide,
9.1 " deep, 7" high
FRONT PANEL FEATURES:
- Dial speed control sets precise speed
and torque
- Auto cruise
- Forward or Reverse rotation
- Dial or Foot speed control
- Digital display for precise speed and torque settings
- Built in overload protection
HP4-717 Control
$399.00
|
Order Toll Free 888-593-9462
|
HP7-7060 Variable Speed Foot Control
|
|
This foot pedal speed control is used (in place of the manual dial on the control box) to vary the speed from 1,000 to 50,000 RPM,
HP4-7060 Foot Control
$51.00
|
Order Toll Free 888-593-9462
|
1070 Micro Motor KitVariable Speed To 38,000 RPM
|
| The 1070 Kit Includes:
- HP4-917 Control
- MH-170 Handpiece With 3/32" Collet
- HP4-960 Variable Speed Foot Control
- HP4-933 Handpiece Cradle
- Spare Fuse
- Spare Motor Brushes
- Total Value
$466.00
$339.00
|
The compact Control has switches on the front for On/Off Power, Forward or Reverse Rotation, and Manual or Foot Speed Control.
Variable speed to 38,000 RPM, speed can be adjusted from low to full speed using the dial on the box, or with the foot pedal.
An Overload Protector Light is also featured that turns red and sounds a beeping alarm when the motor stalls.
The back of the control box has a convenient voltage selector switch for operating eith either 115 or 230 colt. The control converts AC current to DC current required for the handpiece.
The box also has receptacles for the Variable Speed Foot Control and an Optional On/Off Foot Switch.
Burr changes are quick and easy with a simple twist of the front section of the Handpiece.A selection of collet adapters is also available for simplifying changes between accessories with different shank sizes.
|
Order Toll Free 888-593-9462
|
1070 Micro Motor Components
|
MH-170 Micro Motor Handpiece
6.2" overall length, 5/8" grip diameter. 1" motor diameter. 7.3 oz 208 gram. DC30V/1.2A.
Handpiece has a slender,contoured grip for precise and very high speed work and quick release rotary type chuck. Use with accessories rated for at least 40,000 RPM.
Fan cooled,brush type continuous duty motor runs cool and vibration-free and permanently lubricated, shielded ball bearings require no lubrication. This handpiece can also be used with the FM3545 control.
$187.00
|
Order Toll Free 888-593-9462
|
HP4-917 Micro Motor Speed Control
|
|
The compact Control has switches on the front for On/Off Power, Forward or Reverse Rotation, and Manual or Foot Speed Control selection. Speed can be adjusted from low to full speed using the dial on the box, or with the foot pedal. An 0verload Protector Light turns red and sounds a beeping alarm when the motor stalls.
The back of the control has a convenient voltage selector switch for operating with either 110/120 or 220/240 volt. The control converts AC current to DC current required for the handpiece. lt also has receptacles for the Variable Speed Foot Control and an Optional On/Off Foot Switch (see below).
HP4-917 Control
$170.00
|
Order Toll Free 888-593-9462
|
|
Solid state control in heavy duty plastic housing. Varies handpiece speed from off to full speed while control selection switch is in FOOT position only.
HP4-960 Foot Control
$51.00
|
Order Toll Free 888-593-9462
|
Foredom MH-170 Replacement Collets and Motor Burshes
|
1/8" Collet
HP4-117B
$22.00
3/32" (2.35mm) Collet
HP4-117
$22.00
3mm Collet
HP4-117C
$22.00
Motor Brushes
FOR MH-145 HPL4-304
$17.00
|
Motor Brushes
FOR MH-170 HPL4-163
$14.00
Motor Brushes
FOR MH-145A HPL4-504
$17.00
|
|
Order Toll Free 888-593-9462
|
1080 Micro Motor Hammer Kit
|
The 1080 Micro Motor is ideal for stone setting applications, including channel setting, and other decorative and engraving techniques requiring reciprocating action.
The force of the impact can be adjusted from light to full by turning the metal ring while the handpiece is either off or running.
The speed of the hammer action can be varied from 0-5,000 strokes per minute with the manual dial on the control box, or the optional foot speed control.
|
 Accessories shown below
- 3Anvil Points with Threaded shanks
- Adapter for Threaded Anvil Point
- Anvil Point Adapter for Non-threaded Shank Accessories 2.35mm)
- Graver Holder with Allen Key
- 5mm Open End Wrench
- 2Pins used to tighten Anvil Points
- Anvil Point Holder used for shaping the point
The 1080 Kit Includes:
- MH-011 Hammer Handpiece
- HP4-917 Control
- H8-214 Graver Holder
- Handpiece Tray
- Accessorie Tray
- Handpiece Cradle
- Accessories
$659.00
|
Order Toll Free 888-593-9462
|
|
1090 Micro Motor Hammer Kit with MH-170 and MH-011 Handpieces
|
The ultimate micromotor kit for accomplishing most every job. lt includes the complete contents of the 1070 rotary kit with the MH-1 70 handpiece (shown above)plus the MH-011 reciprocating handpiece with its accessories.
The control box has a single receptacle on front panel for connecting one handpiece at a time.
See Kit 1070 listing above details.
|
Accessories shown below
- 3Anvil Points with Threaded shanks
- Adapter for Threaded Anvil Point
- Anvil Point Adapter for Non-threaded Shank Accessories 2.35mm)
- Graver Holder with Allen Key
- 5mm Open End Wrench
- 2Pins used to tighten Anvil Points
- Anvil Point Holder used for shaping the point
The 1090 Kit Includes:
- HP4-917 Control
- MH-011 Hammer Handpiece
- MH-170 Hammer Handpiece
- H8-214 Graver Holder
- Variable Speed Foot Control
- Handpiece Cradle
- Accessories That Come With MH-011
- Spare Brushes and Fuse
- Collet Changing Wrenches
$815.00
|
Order Toll Free 888-593-9462
|
|
HPMH-011 Micro Motor Components
|
HPMH-011 Micro Motor Hammer Handpiece
Hammer handpiece with slender, contoured grip and impact adjustment ring for precise hammering work. Operates from 0 - 5,000 strokes per minute.
- 6 1/4" overall length
- 9/16" grip diameter
- 1" motor diameter
- 13 oz / 369 gram
- 1.5 amps (115V)
- .75 amps (230V)
$518.00
|
Order Toll Free 888-593-9462
|
1011 Accessories and Motor Burshes
|
Anvil Point with Threaded Shank
HP10177K
$3.50
|
Anvil Point Adapter for Threaded Anvil Point
HPH8-32
$25.00
|
Adapter for non-Threaded Shank Accessories
HPH8-35
$25.00
|
Open End Wrench (5mm)
HPH8-38
$1.95
|
Order Toll Free 888-593-9462
|
©2000/2008 This WebSite & All Of Its Pages Are Copyrighted By DLC & Daniel Lopacki...
And the Owners of any Proprietary Logos Or Graphics
Andre Gide ... "Art is a collaboration between God and the artist, and the less the artist does the better."
|
|
|
